Windows Users face problem your pc needs to be repaired error 0xc0000225 or your pc needs to be repaired error code 0x00000f at startup and this error make windows unable to start normally. And the most common causes of the error 0xc0000225, your pc needs to be repaired error code 0xc00000d is that the Boot Configuration Data BCD file has become missing or corrupt. That could happen because of disk write errors, power outages, boot sector viruses, or errors made while configuring the BCD manually. Also this can happen when the system becomes unstable & critical system files start missing. Number of users report After A new hardware device or new Software installation they get error 0xc0000225 , your pc needs to be repaired error code 0xc00000d, your pc needs to be repaired error code 0xc00000f on windows 10 and 8.1 computers
Also Sometimes this error could be encountered if windows shut down unexpectedly while Installing a critical update. For some Other users the error code will different like 0xc000000f – An error occurred while attempting to read the boot configuration data
0xc000014C – The Boot configuration data for your PC is missing or contains errors
0xc0000225 – Boot selection failed because a required device is inaccessible
0x0000098, 0xc0000034 – Boot Configuration Data file missing required information or does not contain a valid OS entry.
Post Contents :-
- 1 Fix error 0xc0000225 or your pc needs to be repaired error code 0xc00000f
Fix error 0xc0000225 or your pc needs to be repaired error code 0xc00000f
So If you are also suffering with this error 0xc0000225, Unable to boot windows normally. And looking for solutions to fix this problem, Here fallow bellow steps.
Remove External devieces
Start with basic troubleshooting make sure any external device not cause this error 0xc0000225, your pc needs to be repaired error code 0xc00000f. To check and confirm Remove all external devices attached to your computer like external Hard disk, printer, webcam, sound jack, scanner or any other external devices. Also if you notice after insert the new keyboard and mouse the problem started then remove them and check windows starts normally. If yes then there is problem with one of your external device.You have to find out the problematic device by insert one by one and start every time the system, when you got the problematic device remove the driver for that device. Visit device manufacturer website, download latest driver for that device and install. Now check problem fixed. Still getting problem contact device manufacturer. If you think there is nothing wrong with external devices then follow next troubleshooting step.
Access Advanced boot options
Due to this problem system don’t allow to boot normally and we cant perform any troubleshoot step to fix this problem. So you have to Access Windows 10 advanced Boot option, Where you can get number of troubleshooting tools like startup repair, Advanced command prompt, System restore, go back to previous version, boot windows into safe mode etc. Check How To Access Advanced Boot options using windows 10 bootable media.
Also you can Refer below video to Access Windows 10 Advanced boot options.
Now here on Advanced Startup Options menu As shown bellow image. Windows will represent different Troubleshooting tools to fix Startup problems like System Restore, Startup repair, Command prompt , system image Recovery, Startup Settings etc.
Perform Startup Repair
Now on Advanced options screen click on Startup Repair option. when you select startup repair this will restart the window and during startup this will start diagnose your system. During this diagnostic phase, Startup Repair will scan your system and analyze the various settings, configuration options, and system files as it looks for corrupt files or botched configuration settings. More specifically, Startup Repair will look for the following problems:
- Missing/corrupt/incompatible drivers
- Missing/corrupt system files
- Missing/corrupt boot configuration settings
- Corrupt registry settings
- Corrupt disk metadata (master boot record, partition table, or boot sector)
- Problematic update installation
If Startup Repair detects any of these types of problems, it will automatically attempt to fix them. If Startup Repair can fix the problem, it will do so without any intervention. It will then restart the system and boot normally. Most of time after perform Startup repair This error 0xc0000225 Your PC needs to be repaired gets solved. If you still having the same error after perform Startup Error then fallow next Troubleshooting step.
Repair Corrupt boot Volume ( MBR )
Same from Advanced startup options open command prompt and perofmr bellow commands to repair the Corrupt boot volume and fix error 0xc0000225, your pc needs to be repaired error code 0xc00000f.
From Advanced boot options select Troubleshoot > Advanced Options Select Command Prompt from list of options now When Command Prompt appears, enter the following lines and press Enter after each line in order to run it:
- List volume
Note down your windows installation volume ( check bellow picture for better understand )
Now Type Exit
The above listed commands help you to find out the Windows Drive Letter that is going require treatment. This is essential to understand the part of our windows Drive Letter that requires the troubleshooting process.
Now Perform Bellow commands to fix :
Frist Type D: ( Note your driver letter may different ) and hit enter key.
Next Type bootrec.exe /fixmbr hit enter to execute the command and fix the master boot record.
After that type bootrec.exe /fixboot hit to fix the boot device related problem.
Now Use command bootrec.exe /rebuildbcd and hit enter to execute the command . next type exit.
Repair Bed Sectors for Hard Disk
After fix the Boot MBR check hard disk for Errors. As we discuss the error is generated due to a corrupted hard disk. so first check your hard disk for errors Sometimes corrupted files on your hard drive can cause these types of errors to appear, but you can fix these errors by performing chkdsk scan. To perform this scan, Type : chkdsk /f /r
Choose “Y” for yes for the question concerning would you like to force a dismount on this volume (Y/N) when you press Y key this will show volume dismounted app opened handles to this volume are now invalid. and the scanning process will start wait until stage 5 complete. this process will take some time wait for that . after complete the scanning process you will got a screen as shown bellow.
Now Type command Exit to exit the command prompt and when the advanced screen appear click on turn off your pc. When you Start your system next time hope you didn’t face any Startup Error Your PC needs to be repaired windows 10. Check After perform this Step problem get solved. still having the same issue fallow next step.
Disable Driver Signature Enforcement permanently,
Also Sometimes Driver signature enforcement can cause this type of problems. We recommend to once disable the Driver signature enforcement and start windows. May this option work for you.
To do this Access the command prompt from advanced boot options and type below commands one by one and hit enter key.
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
Reboot your computer. and check windows started normally. If you want to enable signature enforcement in the future, then open Command Prompt (with administrative rights) and type these commands in order:
bcdedit -set loadoptions ENABLE_INTEGRITY_CHECKS
bcdedit /set testsigning off
Perform system Restore
If after perform all above methods Your PC needs to be repaired windows 10 Startup Error not solved then system Restore can fix your system by Revert back your system to previous working state. you can perform the system Restore from Advanced start up options.
To perform System Restore First Access Advanced Startup Options Here Select the System Restore option.
When the Restore system files and settings opens click on next Now on Restore your computer to the state it was in before the selected event screen select the Restore point date and click next.
On next screen When you click on finish this will prompt a screen “Once Started, System Restore connot be interrupted. Do you want to continue ? ” click yes to confirm the System Restore.
This will start the system Restore Initializing window, Restoring files, Finalizing file Restore, Finishing Restore and Windows will Restore the windows. After restart windows will prompt a confirm message System Restored successfully. And you will get back your windows working normally.
These are some best working solutions to fix your pc needs to be repaired error 0xc0000225 on windows 10, 8.1 and windows 7 computers. Still have any query , suggestion feel free to comment bellow. You can also share your windows 10 problems direct through our contact us form.