Getting DNS server is not responding error while Running the Network Troubleshooting tool? sometimes the error would be like your computer is trying to use DNS server that is incorrect, DNS server not available or DNS server is not responding to Windows 10, 8.1, or Windows 7. This error mostly occurs when the DNS server that translates a domain name doesn’t respond for any reason. Here this post we discuss What is DNS on a Windows computer? Why getting DNS server not responding and how to fix DNS server error on windows 10.
Post Contents :-
What Is DNS?
Before moving To Solutions first understand what is DNS, Why DNS server not responding Error Occurs? DNS stands for Domain name server is an end to end server that translates and then fetches the address of your required website to enable your access to it. For Ex : ( we provide for searching a particular page into the actual address of the web page. It resolves the physical address into IP address. Because the computer only understands IP addresses ) so that you can access and browse the internet. If the DNS Server Stuck, Not Responding your pc unable to translate the Address and Result in No Internet Connection.
This Error Mostly Cause it the DNS Service Corrupted, security firewall certainly blocked your PC and working as a barrier, didn’t communicate with websites, the internal problem in the network adapter or router, etc.
Fix DNS Server is not Responding
After Understand what is DNS on a Windows computer and Why Getting The DNS server isn’t responding. ( Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding ) Let’s Apply Bellows solutions to get rid of this.
Start with Basic solutions, Load The Website on Different browsers, Clean Browser Cache, Cookies Etc.
Restart The Computer, modem, and router Then Reconnect to the Internet.
Disable if any extra network adapter is installed on your computer
Try Disable And Enable the Network Adapter ( To do this press Win + R, Type ncpa.cpl and ok. Then select the Active Adapter right click Disable Then Restart windows and Again Enable the Network Adapter. )
Visit the Network Adapter manufacturer website download the latest available driver and update the current Network Adapter Driver.
Run System File Checker tool, And make sure corrupted system files not causing this issue.
Flush DNS and reset your DNS settings
After check above basic Troubleshooting Steps Still having No internet connection or Troubleshooter results DNS Server is Not Responding Then let’s Try to Flush DNS Cache and Reset DNS settings Completly
To do this click on Start menu search Type cmd and press Ctrl + Shift + Enter to open Command prompt as Administrator. Then Type command ipconfig /flushdns and hit the enter key. After that Restart windows And check the Internet Connection on the next login.
Reset DNS Settings
If still having issues Then Try To Reset DNS Settings by performing the steps below. Again open the command prompt as administrator and Type command below one by one and hit enter to execute the same.
ipconfig /registerdns ipconfig /release ipconfig /renew netsh winsock reset
After That Type exits to close the command prompt and Restart windows to take effect the changes.
Manually Assign DNS Address
To change the DNS server address manually open Control Panel then Network and Internet and go to the Network and Sharing Center. Then Click on Change adapter settings, Select the Active Network adapter that you are using and right-click on it, and open Properties.
Then Double Click on “Internet Protocol Version 4 (TCP/IPv4)”. You’ll see the Internet Protocol Properties click the radio button “Use the Following DNS Server Addresses”. In the“Preferred” one you should type 220.127.116.11 and in the “Alternate” one you should type 18.104.22.168 and press “OK” to save the changes. It is an Open-source service by Open DNS and you can use it to fix this error.
Also, you can use Google Free DNS 22.214.171.124 and 126.96.36.199 after That check mark on Validate Settings upon exit and click ok. Save the changes and close all open windows And Restart windows Check Internet Connection, DNS Server not Responding issue Resolved.
Change Physical Address
Also, Some Users report entering the Physical address in the Network adapter setting helps them to resolve DNS Server is Not Responding problem. You can also fix this issue by changing the physical address of your domain name system server.
To do this open command prompt as administrator, Then type ipconfig /all and hit the enter key to execute the command. Here look for physical Address And Note down the same. For Me its: FC-AA-14-B7-F6-77
Now Press win + R Type ncpa.cpl And hit the enter key. Right-click on the network connection and select its “Properties.” then Select “Configuration” to proceed further.
Now select the “Advanced” tab Select Network Address. Here you will see a category “Value” where you need to enter the physical address you got from Command Prompt. Click “OK” to save the changes.
Now try to connect again after rebooting the system. This time, it will work for sure.
These Are some most Working Solutions To fix Fix DNS Server that is Not Responding, your computer is trying to use a DNS server that is incorrect, etc problem After a recent Windows upgrade. I hope After Apply These solutions your problem get solved and you will get connected to the network and the internet. Still have any query, suggestion, or face any difficulty while performing above steps feel free to discuss in comments below. Also, Read We couldn’t install windows 10 May 2021 update 0x8007002C-0x400D.